Menu
Menu
Refine your choice
Your Cart

Finishing nails for brad tacker

Need finishing nails for your brad tacker? With a brad tacker, you shoot finishing nails into your woodwork without any effort and provide an unobtrusive finish to veneers, trim and thin wood cabinet panels. These finishing nails are available in many shapes and sizes, such as microbrads 21G and minibrads 18G. It is also possible to choose the material that best suits your job or project. Check out the different types of brads in the Tackershop.nl assortment and place an order.

Note: Before ordering, always check the minimum and maximum length of the fastener material of your bradtacker/finishing nailer (mentioned in the user manual).

Product Compare0
DA Brad (15G) galvanized - different lengths
Manufacturer: Bestfix Model: DA-..CNK
DA Brad (15G) galvanized - different lengths
Galvanized Brad Type DA angled DA Brad has a bond angle of 34° and is available in the following lengths: 32 mm - 4.000 pcs per box 38 mm - 4.000 pcs per box 44 mm - 4.000 pcs per box 50 mm - 4.000 pcs per box The DA Brad is equal to: Bostitch DA Dewalt DK51275K Senco D..
€20.93
Ex Tax:€17.30
Add to Cart
Add to Wish List Compare this Product
DA Brad (15G) SS - different lengths
Manufacturer: Bestfix Model: DA-..RVS
DA Brad (15G) SS - different lengths
Angled brad Type DA in stainless steel The SS DA Brad has a bond angle of 34° and is available in the following lengths: 32 mm - 4.000 pcs per box 38 mm - 4.000 pcs per box 44 mm - 4.000 pcs per box 50 mm - 4.000 pcs per box DA-brad is equal to: Bostitch DA Dewalt DK51275..
€110.84
Ex Tax:€91.60
Add to Cart
Add to Wish List Compare this Product
N Brad (16G) aluminum - 23 mm for Fermacell N Brad (16G) aluminum - 23 mm for Fermacell
Manufacturer: Bestfix Model: 16G/23ALU
N Brad (16G) aluminum - 23 mm for Fermacell
16 G Brad is a finishing nail with a wire thickness of 1.6 mm and a head width of 2.8 mm. These brads are widely used for finishing work. The brads are available in many lengths from 15 mm to 50 mm. Some of the tasks where these brads are commonly used include attaching top battens, finishing strips..
€34.49
Ex Tax:€28.50
Add to Cart
Add to Wish List Compare this Product
N Brad (16G) galvanized - different lengths
Manufacturer: Bestfix Model: N-..(16G)CNK
N Brad (16G) galvanized - different lengths
16 G Brad is a finishing nail with a wire thickness of 1.6 mm and a head width of 2.8 mm. These brads are widely used for finishing work. The brads are available in many lengths from 15 mm to 50 mm. Some of the tasks where these brads are commonly used include attaching top battens, finishing strips..
€6.41
Ex Tax:€5.30
Add to Cart
Add to Wish List Compare this Product
N Brad (16G) SS - different lengths
Manufacturer: Bestfix Model: N-..(16G)SS
N Brad (16G) SS - different lengths
16 G Brad is a finishing nail with a wire thickness of 1.6 mm and a head width of 2.8 mm. These brads are widely used for finishing work. The brads are available in many lengths from 15 mm to 50 mm. Some of the tasks where these brads are commonly used include attaching top battens, finishing strips..
€88.69
Ex Tax:€73.30
Add to Cart
Add to Wish List Compare this Product
NA Brad (16G) galvanized - different lengths
Manufacturer: Press Model: NA-..CNK
NA Brad (16G) galvanized - different lengths
The NA brad (20 degrees) is a high-quality 16-gauge angled brad nail, ideal for fine and precise work such as carpentry, attaching baseboards, and other finishing applications. With a head width of 3.00 mm, this brad provides a subtle finish without compromising on strength. The NA Brad is ava..
€11.98
Ex Tax:€9.90
Add to Cart
Add to Wish List Compare this Product
NA Brad (16G) SS - different lengths
Manufacturer: Press Model: NA-..RVS
NA Brad (16G) SS - different lengths
The NA brad (20 degrees) is a high-quality 16-gauge angled brad nail, ideal for fine and precise work such as carpentry, attaching baseboards, and other finishing applications. With a head width of 3.00 mm, this brad provides a subtle finish without compromising on strength. The NA Brad is ava..
€62.80
Ex Tax:€51.90
Add to Cart
Add to Wish List Compare this Product
Pin 8 (21G) galvanized - different lengths
Manufacturer: Bestfix Model: PIN8/
Pin 8 (21G) galvanized - different lengths
The 23G headless brad type Pin 8 is available in the following lengths: 12 mm – 14000 pcs per box 15 mm – 14000 pcs per box 18 mm – 14000 pcs per box 21 mm – 14000 pcs per box 25 mm – 14000 pcs per box 28 mm – 14000 pcs per box 30 mm – 14000 pcs per box 35 mm – 14000 pcs per box ..
€18.97
Ex Tax:€15.68
Add to Cart
Add to Wish List Compare this Product
JA Microbrad (21G) galvanized - different lengths
Manufacturer: Bestfix Model: JA-..(21G)CNK
JA Microbrad (21G) galvanized - different lengths
21 G micro brads are very small finishing nails with a wire diameter of 0.8 mm and a head width of 1.4 mm. These micro brads are often used for tasks where a very small mark, also called a wound, is desired. Some tasks for which they are commonly used include securing finishing moldings, attaching p..
€19.36
Ex Tax:€16.00
Add to Cart
Add to Wish List Compare this Product
J Minibrad (18G) galvanized - different lengths
Manufacturer: Bestfix Model: J-..(18G)CNK
J Minibrad (18G) galvanized - different lengths
18 G Mini brads are finishing nails with a wire thickness of only 1.2 mm and a head width of 2.0 mm. These mini brads are widely used for trim work where a small so-called wound (imprint) is desired. The mini brads are available in many lengths from 10 mm to 50 mm. Some of the tasks for which these ..
€6.90
Ex Tax:€5.70
Add to Cart
Add to Wish List Compare this Product
J Minibrad (18G) SS - different lengths
Manufacturer: Bestfix Model: J-..(18G)RVS
J Minibrad (18G) SS - different lengths
18 G Mini brads are finishing nails with a wire thickness of only 1.2 mm and a head width of 2.0 mm. These mini brads are widely used for trim work where a small so-called wound (imprint) is desired. The mini brads are available in many lengths from 10 mm to 50 mm. Some of the tasks for which these ..
€35.82
Ex Tax:€29.60
Add to Cart
Add to Wish List Compare this Product
Showing 1 to 11 of 11 (1 Pages)

What are finishing nails for a brad tacker?

Finish nails or finishing nails are, as the name suggests, used for the neat and precise finishing of woodwork, such as frames, skirting boards and furniture. The small, thin nails are also called 'minibrads' and 'microbrads' because of their small diameter. Typically, finishing nails are 15-25mm long and have a fine head to ensure minimal visibility and a smooth finish to your projects. Do you want to make sure that the nails are not visible? Then it is also possible to opt for headless finishing nails. In English, finishing nails with heads are called brads. Headless brads are known as pins.

How do you use the finishing nails? A micro brad tacker is a handy and lightweight pneumatic device that allows you to drive in finishing nails effortlessly without damaging the surface. Especially for jobs that require precision, it is the best brad tacker to do efficient work. In many cases it is also not necessary to apply filler or sanding..

What material are finishing nails made of?

Finish nails are usually made of high-quality steel. Their small size makes them ideal for use in finer woods such as MDF and thin plywood where larger nails would be undesirable. The use of steel provides durability and strength, so that the nails stay firmly in place without bending or breaking during driving. Finishing brads are available in galvanized steel, in stainless steel, but also as concrete nails for a concrete nail tacker, in aluminum or even plastic (polymer). You simply load the brad tacker with the nails and you can continue with your project.

Different shapes and sizes

The thickness of the metal wire is usually indicated according to the American Wire Gauge system, such as 16G, 18G, 21G and 23G. Brads can be stapled together on a straight strip, but also diagonally like DA brads and FN brads. It is important to note that minibrads or microbrads are not suitable for construction purposes because they do not have the same strength as nails or screws. Below is an overview of the available types of brads and pins:

Because there are many different shapes and sizes available, the brads have different names based on the diameter, so you can easily separate them. You have minibrads (18G) and microbrads (21G). Using the correct finishing nails is essential to ensure that the end result looks aesthetically pleasing and lasts a long time. Microbrads 21G are primarily used for decorative and finishing purposes where minimal visibility is desired, such as furniture construction, joinery, cabinet assembly and even delicate art and hobby projects. Microbrads 18G are suitable for the same purposes, with veneers in particular.

Place an order

Have you found the right finishing nails for your brad tacker, for example 21 gauge microbrads or 18G minibrads? Place an order on Best-Fix's Tackershop.nl and we will get to work for you right away. We have a large stock and good knowledge of the products. We therefore recommend that you check the minimum and maximum length of the brad tacker fasteners before ordering.

Are you not sure whether you have chosen the right brads or would you like to receive more information about the possibilities? Please do not hesitate to contact us, we will be happy to help you find a suitable solution. You can use our contact form or send a email. Prefer to contact us directly? Then you can call +31 (0)570 768 737 .

Filter Products