Parts of a staple:
There are 3 important measurements on a staple; the crown, the leg and the wire dimension. The wider the crown and the thicker the wire, the more secure the fastening will be.
The holding power of a cliched staple is dependent on all these measurements.
Note: Before you buy always check the minimum and maximum length of the fasteners that fit in your tool (mentioned in the tool owner's manual)
Manufacturer: Bestfix
Model: S4/
Galvanized Kram type S4
Kram type S4 has a crown width of 12.3 mm and is available in the following lengths:
22 mm - box à 20,000 pcs.
25 mm - 10,000 pcs box
28 mm - 10,000 pcs box
32 mm - 10,000 pcs box
35 mm - 10,000 pcs box
38 mm - 10,000 pcs. box
41 mm - 10,000 pcs. box
45..
€105.71
Ex Tax:€87.36
Manufacturer: Bestfix
Model: S5/DP
Galvanized Staple type S5 wit divergent points, a.o. suitable for fermacell
Staple type S5 has a crown size of 10,8 mm and is available in the following lengths:
19 mm - 10.000 pcs per box
22 mm - 10.000 pcs per box
Divergent points:
Staple S5 is equal to:
Atro 100
Bea..
€46.19
Ex Tax:€38.17
Manufacturer: Bestfix
Model: S5/
Galvanized Kram type S5
Kram type S5 has a crown width of 10.8 mm and is available in the following lengths:
16 mm - box of 10,000 pcs.
19 mm - 10,000 pcs box
22 mm - 10,000 pcs box
25 mm - 10,000 pcs box
30 mm - 10,000 pcs box
32 mm - 10,000 pcs. box
35 mm - 10,000 pcs. box
3..
€40.99
Ex Tax:€33.88
Manufacturer: Bestfix
Model: SJK
Galvanized Staple type SJK
Staple type SJK has a crown size of 4,2 mm and is available in the following lengths:
06 mm - 10.000 pcs per box
10 mm - 10.000 pcs per box
12 mm - 10.000 pcs per box
16 mm - 10.000 pcs per box
Staple type SJK is equal to:
Atro SJK
Bostitch SJ30..
€9.85
Ex Tax:€8.14
Manufacturer: Bestfix
Model: SK/
Galvanized Staple type SK
Staple SK has a crown size of 26,5 mm and is available in the following lengths:
12 mm - 7.500 pcs per box
16 mm - 10.000 pcs per box
19 mm - 10.000 pcs per box
22 mm - 10.000 pcs per box
25 mm - 10.000 pcs per box
32 mm - 10.000 pcs per box
38 mm - 10...
€38.82
Ex Tax:€32.08
Manufacturer: Arrow
Model: T18/
Round Crown Staple type T18 for low voltage wire up to ø 5 mm,
Cable Clamp T18 is available in the following lengths:
10 mm - 1.000 pcs per box
11 mm - 1.000 pcs per box
Suitable as a replacement for Novus S wire staple..
€5.93
Ex Tax:€4.90
Manufacturer: Arrow
Model: T20/
Arrow ® staple type T20 is available in the following lengths:
08 mm - 1.000 pcs per box
10 mm - 1.000 pcs per box..
€3.99
Ex Tax:€3.30
Manufacturer: Arrow
Model: T50/13
Galvanized ceiling tile staple type T50. With special staple, the legs are bent to 2 sides, so it has a higher pull-out strength.
This ceiling tile staple has a crown size of 10.6 mm and a length of 13 mm.
1.250 pcs per box
Explanation divergent points (DP):..
€7.26
Ex Tax:€6.00
Manufacturer: Arrow
Model: T50/..SS
Staple type T50 in Stainless Steel
Staple type T50 SS has a crown size of 10,6 mm and is available in the following lengths:
06 mm - 1.000 pcs per box
08 mm - 1.000 pcs per box
10 mm - 1.000 pcs per box
12 mm – 1.000 pcs per box
Staple T50 is equal to:
Arrow T50
Bea 11
..
€18.25
Ex Tax:€15.08
Manufacturer: Arrow
Model: T50/
Galvanized Staple type T50
Staple type T50 has a crown size of 10,6 mm and is available in the following lengths:
06 mm - 1.250 pcs per box OR 5.000 pcs per box
08 mm - 1.250 pcs per box OR 5.000 pcs per box
10 mm - 1.250 pcs per box OR 5.000 pcs per box
12 mm - 1.250 pcs per box OR 5..
€5.38
Ex Tax:€4.45
Manufacturer: Bestfix
Model: CF25
Corrugated staple type CF25 has a width of 25 mm and is available in the following lengths:
9.5 mm - box of 1,500 pcs.
13 mm - box of 1.200 pcs.
15 mm - box of 900 pcs
Corrugated CF25 is similar to:
Atro W, CF
Bea WS
Duofast DFC-100
Haubold WN12,5
Prebena WN
Senco WW
..
€32.38
Ex Tax:€26.76
Manufacturer: Bostitch
Model: 58/
Staple type 58 has a crown size of 13,0 mm and is available in the following lengths:
4 mm - 5.000 pcs per box
6 mm - 5.000 pcs per box
** Other lengths on request
Staple 58 is equal to:
ESCO 58
Prebena NT..
€5.70
Ex Tax:€4.71